MKD-T500 Skid Steer Loader

Key Features

1. 500kg Payload with 0.22m³ Cargo Bed

A 500kg rated load and 0.22m³ bed carry ample sand, spoil, topsoil and feed in one pass; the light, compact body reaches sites hand carts cannot, mechanizing hauling where space restricts larger equipment and noticeably raising efficiency.

2. 95mm Ultra-tight Turning Radius

With a minimum turning radius of 95mm and track pivot movement, it steers nimbly through stair landings, elevators, greenhouse aisles, garden paths and equipment gaps — no wide turning space needed for tight confined access.

3. 20° Climb with 805Nm Torque

The Northern Hydraulics 200cc travel motor produces 805Nm maximum torque at 20MPa, pulling away loaded on slopes without slip; the 20° climbing ability covers site ramps, field ridges and typical grades around outdoor steps.

4. 86° Hydraulic Bed Dump, Clean Unloading

The bed tilts to 86°, high enough to shed sticky soil, wet sand and rubble without clinging residue; lever-controlled hydraulic dumping saves manual effort and improves unloading safety versus manual tipping.

5. Optional Front Bucket, 109° Self-load Dump

With the optional front bucket, the 109° tilt angle scoops loose material locally and raises it to dump, closing the load-haul-dump loop; bucket and bed configurations suit different work habits, combining hauling with light loading.

6. Compact, Rugged for Multiple Scenarios

At about 1735×844×1255mm and under 85cm wide, it passes standard doorways and loads onto transport easily; the reinforced steel bed and tracked frame resist knocks, suiting landscaping, agriculture, renovation, municipal maintenance and small projects.